The well known Indian automotive design house, DC Design has unveiled its supercar called the Avanti. According to reports, the car has been named after the Studbaker Avanti that appeared in Tintin comics. The idea behind the Avanti, which means 'forward' in Italian, is to make affordable supercars and the car is expected to be priced at Rs 30 lakh, it was reported.
The Avanti is expected to do a sub-seven second zero to hundred timing. These engines are mated to a 6-speed dual-clutch transmission system. According to the reports, the engines are being tuned in the UK and will be shipped to India in crates where they will be installed the cars. Much like the engines, most of the other components that go into the cars will also be imported into the country.
Type: 2.0L Four Cylinder
Maximum power: 240 BHP @ 5500 RPM
Maximum Torque: 270lb/ft of torque @3500 RPM
Transmission: MMT6 6speed
Turbocharged engine with direct injection and VVT DOHC Four valves per cylinder
Tubular space frame
Jig built
TIG welded
Suspension
Unequal length double wishbones
Coil cover shock absorbers
Steering and Brakes
Rack and pinion
330 mm ventilated discs (Front and Rear) AP racing calipers Wheels
Front rim size - 8.5J-19
Tyres - 255/35 19” x 8.5 J
Track - 1680 mm
Rear Rim size - 11J-19
Tyres - 295/30 19” x 11 J
Track - 1660 mm
Wheelbase - 2700 mm
Length - 4623 mm
Width - 1967 mm
Height - 1213 mm
Front Over hang - 993 mm
Rear Over hang - 930 mm
Ground clearance - 155 mm
Dry kerb weight - 1562 kgs
The Avanti is expected to do a sub-seven second zero to hundred timing. These engines are mated to a 6-speed dual-clutch transmission system. According to the reports, the engines are being tuned in the UK and will be shipped to India in crates where they will be installed the cars. Much like the engines, most of the other components that go into the cars will also be imported into the country.
DC Design is also setting up showrooms across the country in order to sell the Avanti Supercar
Specifications of the car: Engine
Type: 2.0L Four Cylinder
Maximum power: 240 BHP @ 5500 RPM
Maximum Torque: 270lb/ft of torque @3500 RPM
Transmission: MMT6 6speed
Turbocharged engine with direct injection and VVT DOHC Four valves per cylinder
Chassis
Tubular space frame
Jig built
TIG welded
Suspension
Unequal length double wishbones
Coil cover shock absorbers
Steering and Brakes
Rack and pinion
330 mm ventilated discs (Front and Rear) AP racing calipers Wheels
Front rim size - 8.5J-19
Tyres - 255/35 19” x 8.5 J
Track - 1680 mm
Rear Rim size - 11J-19
Tyres - 295/30 19” x 11 J
Track - 1660 mm
Dimensions
Wheelbase - 2700 mm
Length - 4623 mm
Width - 1967 mm
Height - 1213 mm
Front Over hang - 993 mm
Rear Over hang - 930 mm
Ground clearance - 155 mm
Dry kerb weight - 1562 kgs
